nuphrax. account
You can Login or Connect and join.
(Use your nuPHRAX IRC nick/pass to login)
Affiliates
nuphrax .online.staff


Services on nuPHRAX

| NickServ | ChanServ | MemoServ | HostServ | BotServ | OperServ |

| Fantasy Commands |

CHANSERV

  • HELP
      ChanServ allows you to register and control various
      aspects of channels.  ChanServ can often prevent
      malicious users from "taking over" channels by limiting
      who is allowed channel operator privileges.  Available
      commands are listed below; to use them, type
      /msg ChanServ command.  For more information on a
      specific command, type /msg ChanServ HELP command.
       
      
    
  • EXPIRES
      
      Note that any channel which is not used for 90 days
      (i.e. which no user on the channel's access list enters
      for that period of time) will be automatically dropped.
    
    
  • REGISTER
      Syntax: /msg ChanServ  REGISTER channel password description
      
      Registers a channel in the ChanServ database.  In order
      to use this command, you must first be a channel operator
      on the channel you're trying to register.  The password
      is used with the IDENTIFY command to allow others to
      make changes to the channel settings at a later time.
      The last parameter, which must be included, is a
      general description of the channel's purpose.
      
      When you register a channel, you are recorded as the
      "founder" of the channel.  The channel founder is allowed
      to change all of the channel settings for the channel;
      ChanServ will also automatically give the founder
      channel-operator privileges when s/he enters the channel.
      See the ACCESS command (/msg ChanServ HELP ACCESS) for
      information on giving a subset of these privileges to
      other channel users.
      
      NOTICE: In order to register a channel, you must have
      first registered your nickname.  If you haven't,
      /msg ChanServ HELP for information on how to do so.
    
    
  • IDENTIFY
      Syntax: /msg ChanServ  IDENTIFY channel password
      
      Authenticates you to ChanServ as the founder of the given
      channel.  Many commands require you to use this command
      before using them.  The password should be the same one
      you sent with the REGISTER command.
      
    
  • LOGOUT
      Syntax: /msg ChanServ  LOGOUT channel nickname
      
      This command will log the selected nickname out meaning they 
      would have to reidentify themselves to regain their access.
      
      If you are the founder of the channel, you can log out anybody,
      else you can only log out yourself.
    
    
  • DROP
      Syntax: /msg ChanServ  DROP channel
      
      Unregisters the named channel.  Can only be used by
      channel founder, who must use the IDENTIFY command first.
    
    
  • SET
      Syntax: /msg ChanServ  SET channel option parameters
      
      Allows the channel founder to set various channel options
      and other information.
      
      Available options:
      
          FOUNDER       Set the founder of a channel
          SUCCESSOR     Set the successor for a channel
          PASSWORD      Set the founder password
          DESC          Set the channel description
          URL           Associate a URL with the channel
          EMAIL         Associate an E-mail address with the channel
          ENTRYMSG      Set a message to be sent to users when they
                           enter the channel
          BANTYPE       Set how Services make bans on the channel
          MLOCK         Lock channel modes on or off
          KEEPTOPIC     Retain topic when channel is not in use
          OPNOTICE      Send a notice when OP/DEOP commands are used
          PEACE         Regulate the use of critical commands
          PRIVATE       Hide channel from LIST command
          RESTRICTED    Restrict access to the channel
          SECURE        Activate ChanServ security features
          SECUREOPS     Stricter control of chanop status
          SECUREFOUNDER Stricter control of channel founder status
          SIGNKICK      Sign kicks that are done with KICK command
          TOPICLOCK     Topic can only be changed with TOPIC
          XOP           Toggle the user privilege system
      
      Type /msg ChanServ HELP SET option for more information on a
      particular option.
    
    
  • SET FOUNDER
      Syntax: /msg ChanServ  SET channel FOUNDER nick
      
      Changes the founder of a channel.  The new nickname must
      be a registered one.
    
    
  • SET SUCCESSOR
      Syntax: /msg ChanServ  SET channel SUCCESSOR nick
      
      Changes the successor of a channel.  If the founder's
      nickname expires or is dropped while the channel is still
      registered, the successor will become the new founder of the
      channel.  However, if the successor already has too many
      channels registered (20), the channel will be dropped
      instead, just as if no successor had been set.  The new
      nickname must be a registered one.
    
    
  • SET PASSWORD
      Syntax: /msg ChanServ  SET channel PASSWORD password
      
      Sets the password used to identify as the founder of the
      channel.
    
    
  • SET DESC
      Syntax: /msg ChanServ  SET channel DESC description
      
      Sets the description for the channel, which shows up with
      the LIST and INFO commands.
    
    
  • SET URL
      Syntax: /msg ChanServ  SET channel URL [url]
      
      Associates the given URL with the channel.  This URL will
      be displayed whenever someone requests information on the
      channel with the INFO command.  If no parameter is given,
      deletes any current URL for the channel.
    
    
  • SET EMAIL
      Syntax: /msg ChanServ  SET channel EMAIL [address]
      
      Associates the given E-mail address with the channel.
      This address will be displayed whenever someone requests
      information on the channel with the INFO command.  If no
      parameter is given, deletes any current E-mail address for
      the channel.
    
    
  • SET ENTRYMSG
      Syntax: /msg ChanServ  SET channel ENTRYMSG [message]
      
      Sets the message which will be sent via /notice to users
      when they enter the channel.  If no parameter is given,
      causes no message to be sent upon entering the channel.
    
    
  • SET BANTYPE
      Syntax: /msg ChanServ  SET channel BANTYPE bantype
      
      Sets the ban type that will be used by services whenever
      they need to ban someone from your channel.
      
      bantype is a number between 0 and 3 that means:
      
      0: ban in the form *!user@host
      1: ban in the form *!*user@host
      2: ban in the form *!*@host
      3: ban in the form *!*user@*.domain
    
    
  • SET KEEPTOPIC
      Syntax: /msg ChanServ  SET channel KEEPTOPIC {ON | OFF}
      
      Enables or disables the topic retention option for a
      channel.  When topic retention is set, the topic for the
      channel will be remembered by ChanServ even after the
      last user leaves the channel, and will be restored the
      next time the channel is created.
    
    
  • SET TOPICLOCK
      Syntax: /msg ChanServ  SET channel TOPICLOCK {ON | OFF}
      
      Enables or disables the topic lock option for a channel.
      When topic lock is set, ChanServ will not allow the
      channel topic to be changed except via the TOPIC
      command.
    
    
  • SET MLOCK
      Syntax: /msg ChanServ  SET channel MLOCK modes
      
      Sets the mode-lock parameter for the channel. ChanServ
      allows you to define certain channel modes to be always
      on, off or free to be either on or off.
      
      The modes parameter is constructed exactly the same way 
      as a /MODE command; that is, modes followed by a + are 
      locked on, and modes followed by a - are locked off. Note,
      however, that unlike the /MODE command, each use of
      SET MLOCK will remove all modes previously locked before
      setting the new!
      
      Warning:  If you set a mode-locked key, as in the second
      example below, you should also set the RESTRICTED option for
      the channel (see HELP SET RESTRICTED), or anyone entering
      the channel when it is empty will be able to see the key!
      
      Examples:
      
          SET #channel MLOCK +nt-iklps
              Forces modes n and t on, and modes i, k, l, p, and
              s off.  Mode m is left free to be either on or off.
      
          SET #channel MLOCK +knst-ilmp my-key
              Forces modes k, n, s, and t on, and modes i, l, m,
              and p off.  Also forces the channel key to be
              "my-key".
      
          SET #channel MLOCK +
              Removes the mode lock; all channel modes are free
              to be either on or off.
    
    
  • SET PEACE
      Syntax: /msg ChanServ  SET channel PEACE {ON | OFF}
      
      Enables or disables the peace option for a channel.
      When peace is set, a user won't be able to kick,
      ban or remove a channel status of a user that has
      a level superior or equal to his via ChanServ commands.
    
    
  • SET PRIVATE
      Syntax: /msg ChanServ  SET channel PRIVATE {ON | OFF}
      
      Enables or disables the private option for a channel.
      When private is set, a /msg ChanServ LIST will not
      include the channel in any lists.
    
    
  • SET RESTRICTED
      Syntax: /msg ChanServ  SET channel RESTRICTED {ON | OFF}
      
      Enables or disables the restricted access option for a
      channel.  When restricted access is set, users not on
      the access list will instead be kicked and banned from the channel.
    
    
  • SET SECURE
      Syntax: /msg ChanServ  SET channel SECURE {ON | OFF}
      
      Enables or disables ChanServ's security features for a
      channel.  When SECURE is set, only users who have
      registered their nicknames with ChanServ and IDENTIFY'd
      with their password will be given access to the channel
      as controlled by the access list.
    
    
  • SET SECUREOPS
      Syntax: /msg ChanServ  SET channel SECUREOPS {ON | OFF}
      
      Enables or disables the secure ops option for a channel.
      When secure ops is set, users who are not on the userlist
      will not be allowed chanop status.
      
    
  • SET SECUREFOUNDER
      Syntax: /msg ChanServ  SET channel SECUREFOUNDER {ON | OFF}
      
      Enables or disables the secure founder option for a channel.
      When secure founder is set, only the real founder will be
      able to drop the channel, change its password, its founder and its
      successor, and not those who are IDENTIFY'd with ChanServ.
      
    
  • SET SIGNKICK
      Syntax: /msg ChanServ  SET channel SIGNKICK {ON | LEVEL | OFF}
      
      Enables or disables signed kicks for a
      channel.  When SIGNKICK is set, kicks issued with
      ChanServ KICK command will have the nick that used the
      command in their reason.
      
      If you use LEVEL, those who have a level that is superior 
      or equal to the SIGNKICK level on the channel won't have their 
      kicks signed. See /msg ChanServ HELP LEVELS for more information. 
    
    
  • SET XOP
      Syntax: /msg ChanServ  SET channel XOP {ON | OFF}
      
      Enables or disables the xOP lists system for a channel.
      When XOP is set, you have to use the AOP/SOP/VOP
      commands in order to give channel privileges to
      users, else you have to use the ACCESS command.
      
      Technical Note: when you switch from access list to xOP 
      lists system, your level definitions and user levels will be
      changed, so you won't find the same values if you
      switch back to access system! 
      
      You should also check that your users are in the good xOP 
      list after the switch from access to xOP lists, because the 
      guess is not always perfect... in fact, it is not recommended 
      to use the xOP lists if you changed level definitions with 
      the LEVELS command.
      
      Switching from xOP lists system to access list system
      causes no problem though.
    
    
  • SET OPNOTICE
      Syntax: /msg ChanServ  SET channel OPNOTICE {ON | OFF}
      
      Enables or disables the op-notice option for a channel.
      When op-notice is set, ChanServ will send a notice to the
      channel whenever the OP or DEOP commands are used for a user
      in the channel.
    
    
  • AOP
      Syntax: /msg ChanServ  AOP channel ADD nick
              AOP channel DEL {nick | entry-num | list}
              AOP channel LIST [mask | list]
              AOP channel CLEAR
      
      Maintains the AOP (AutoOP) list for a channel. The AOP 
      list gives users the right to be auto-opped on your channel,
      to unban or invite themselves if needed, to have their
      greet message showed on join, and so on.
      
      The AOP ADD command adds the given nickname to the
      AOP list.
      
      The AOP DEL command removes the given nick from the
      AOP list.  If a list of entry numbers is given, those
      entries are deleted.  (See the example for LIST below.)
      
      The AOP LIST command displays the AOP list.  If
      a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         AOP #channel LIST 2-5,7-9
            Lists AOP entries numbered 2 through 5 and
            7 through 9.
            
      The AOP CLEAR command clears all entries of the
      AOP list.
      
      The AOP ADD and AOP DEL commands are limited to
      SOPs or above, while the AOP CLEAR command can only
      be used by the channel founder. However, any user on the
      AOP list may use the AOP LIST command.
      
      This command may have been disabled for your channel, and
      in that case you need to use the access list. See 
      /msg ChanServ HELP ACCESS for information about the access list,
      and /msg ChanServ HELP SET XOP to know how to toggle between 
      the access list and xOP list systems.
    
    
  • HOP
      Syntax: /msg ChanServ  HOP channel ADD nick
              HOP channel DEL {nick | entry-num | list}
              HOP channel LIST [mask | list]
              HOP channel CLEAR
      
      Maintains the HOP (HalfOP) list for a channel. The HOP 
      list gives users the right to be auto-halfopped on your 
      channel.
      
      The HOP ADD command adds the given nickname to the
      HOP list.
      
      The HOP DEL command removes the given nick from the
      HOP list.  If a list of entry numbers is given, those
      entries are deleted.  (See the example for LIST below.)
      
      The HOP LIST command displays the HOP list.  If
      a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         HOP #channel LIST 2-5,7-9
            Lists HOP entries numbered 2 through 5 and
            7 through 9.
            
      The HOP CLEAR command clears all entries of the
      HOP list.
      
      The HOP ADD, HOP DEL and HOP LIST commands are 
      limited to AOPs or above, while the HOP CLEAR command 
      can only be used by the channel founder.
      
      This command may have been disabled for your channel, and
      in that case you need to use the access list. See 
      /msg ChanServ HELP ACCESS for information about the access list,
      and /msg ChanServ HELP SET XOP to know how to toggle between 
      the access list and xOP list systems.
    
    
  • SOP
      Syntax: /msg ChanServ  SOP channel ADD nick
              SOP channel DEL {nick | entry-num | list}
              SOP channel LIST [mask | list]
              SOP channel CLEAR
      
      Maintains the SOP (SuperOP) list for a channel. The SOP 
      list gives users all rights given by the AOP list, and adds
      those needed to use the AutoKick and the BadWords lists, 
      to send and read channel memos, and so on.
      
      The SOP ADD command adds the given nickname to the
      SOP list.
      
      The SOP DEL command removes the given nick from the
      SOP list.  If a list of entry numbers is given, those
      entries are deleted.  (See the example for LIST below.)
      
      The SOP LIST command displays the SOP list.  If
      a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         SOP #channel LIST 2-5,7-9
            Lists AOP entries numbered 2 through 5 and
            7 through 9.
            
      The SOP CLEAR command clears all entries of the
      SOP list.
      
      The SOP ADD, SOP DEL and SOP CLEAR commands are 
      limited to the channel founder. However, any user on the
      AOP list may use the SOP LIST command.
      
      This command may have been disabled for your channel, and
      in that case you need to use the access list. See 
      /msg ChanServ HELP ACCESS for information about the access list,
      and /msg ChanServ HELP SET XOP to know how to toggle between 
      the access list and xOP list systems.
    
    
  • VOP
      Syntax: /msg ChanServ  VOP channel ADD nick
              VOP channel DEL {nick | entry-num | list}
              VOP channel LIST [mask | list]
              VOP channel CLEAR
      
      Maintains the VOP (VOicePeople) list for a channel.  
      The VOP list allows users to be auto-voiced and to voice 
      themselves if they aren't.
      
      The VOP ADD command adds the given nickname to the
      VOP list.
      
      The VOP DEL command removes the given nick from the
      VOP list.  If a list of entry numbers is given, those
      entries are deleted.  (See the example for LIST below.)
      
      The VOP LIST command displays the VOP list.  If
      a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         VOP #channel LIST 2-5,7-9
            Lists VOP entries numbered 2 through 5 and
            7 through 9.
            
      The VOP CLEAR command clears all entries of the
      VOP list.
      
      The VOP ADD, VOP DEL and VOP LIST commands are 
      limited to AOPs or above, while the VOP CLEAR command 
      can only be used by the channel founder.
      
      This command may have been disabled for your channel, and
      in that case you need to use the access list. See 
      /msg ChanServ HELP ACCESS for information about the access list,
      and /msg ChanServ HELP SET XOP to know how to toggle between 
      the access list and xOP list systems.
    
    
  • ACCESS
      Syntax: /msg ChanServ  ACCESS channel ADD nick level
              ACCESS channel DEL {nick | entry-num | list}
              ACCESS channel LIST [mask | list]
              ACCESS channel CLEAR
      
      Maintains the access list for a channel.  The access
      list specifies which users are allowed chanop status or
      access to ChanServ commands on the channel.  Different
      user levels allow for access to different subsets of
      privileges; /msg ChanServ HELP ACCESS LEVELS for more
      specific information.  Any nick not on the access list has
      a user level of 0.
      
      The ACCESS ADD command adds the given nickname to the
      access list with the given user level; if the nick is
      already present on the list, its access level is changed to
      the level specified in the command.  The level specified
      must be less than that of the user giving the command, and
      if the nick is already on the access list, the current
      access level of that nick must be less than the access level
      of the user giving the command.
      
      The ACCESS DEL command removes the given nick from the
      access list.  If a list of entry numbers is given, those
      entries are deleted.  (See the example for LIST below.)
      
      The ACCESS LIST command displays the access list.  If
      a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         ACCESS #channel LIST 2-5,7-9
            Lists access entries numbered 2 through 5 and
            7 through 9.
            
      The ACCESS CLEAR command clears all entries of the
      access list.
    
    
  • ACCESS LEVELS
      User access levels
      
      By default, the following access levels are defined:
      
         Founder   Full access to ChanServ functions; automatic
                           opping upon entering channel.  Note
                           that only one person may have founder
                           status (it cannot be given using the
                           ACCESS command).
              10   Access to AKICK command; automatic opping.
               5   Automatic opping.
               3   Automatic voicing.
               0   No special privileges; can be opped by other
                           ops (unless secure-ops is set).
              <0   May not be opped.
      
      These levels may be changed, or new ones added, using the
      LEVELS command; type /msg ChanServ HELP LEVELS for
      information.
    
    
  • AKICK
      Syntax: /msg ChanServ  AKICK channel ADD {nick | mask} [reason]
              AKICK channel STICK mask
              AKICK channel UNSTICK mask
              AKICK channel DEL {nick | mask | entry-num | list}
              AKICK channel LIST [mask | entry-num | list]
              AKICK channel VIEW [mask | entry-num | list]
              AKICK channel ENFORCE
              AKICK channel CLEAR
      
      Maintains the AutoKick list for a channel.  If a user
      on the AutoKick list attempts to join the channel,
      ChanServ will ban that user from the channel, then kick
      the user.
      
      The AKICK ADD command adds the given nick or usermask
      to the AutoKick list.  If a reason is given with
      the command, that reason will be used when the user is
      kicked; if not, the default reason is "You have been
      banned from the channel".
      When akicking a registered nick the nickserv account
      will be added to the akick list instead of the mask.
      All users within that nickgroup will then be akicked.
      
      The AKICK STICK command permanently bans the given mask 
      on the channel. If someone tries to remove the ban, ChanServ
      will automatically set it again. You can't use it for
      registered nicks.
      
      The AKICK UNSTICK command cancels the effect of the
      AKICK STICK command, so you'll be able to unset the
      ban again on the channel.
      
      The AKICK DEL command removes the given nick or mask
      from the AutoKick list.  It does not, however, remove any
      bans placed by an AutoKick; those must be removed
      manually.
      
      The AKICK LIST command displays the AutoKick list, or
      optionally only those AutoKick entries which match the
      given mask.
      
      The AKICK VIEW command is a more verbose version of
      AKICK LIST command.
      
      The AKICK ENFORCE command causes ChanServ to enforce the
      current AKICK list by removing those users who match an
      AKICK mask.
      
      The AKICK CLEAR command clears all entries of the
      akick list.
    
    
  • LEVELS
      Syntax: /msg ChanServ  LEVELS channel SET type level
              LEVELS channel {DIS | DISABLE} type
              LEVELS channel LIST
              LEVELS channel RESET
      
      The LEVELS command allows fine control over the meaning of
      the numeric access levels used for channels.  With this
      command, you can define the access level required for most
      of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
      commands, as well as this command, are always restricted to
      the channel founder.)
      
      LEVELS SET allows the access level for a function or group of
      functions to be changed.  LEVELS DISABLE (or DIS for short)
      disables an automatic feature or disallows access to a
      function by anyone other than the channel founder.
      LEVELS LIST shows the current levels for each function or
      group of functions.  LEVELS RESET resets the levels to the
      default levels of a newly-created channel (see
      HELP ACCESS LEVELS).
      
      For a list of the features and functions whose levels can be
      set, see HELP LEVELS DESC.
    
    
  • INFO
      Syntax: /msg ChanServ  INFO channel [ALL]
      
      Lists information about the named registered channel,
      including its founder, time of registration, last time
      used, description, and mode lock, if any. If ALL is 
      specified, the entry message and successor will also 
      be displayed.
      
      By default, the ALL option is limited to those with
      founder access on the channel.
    
    
  • LIST
      Syntax: /msg ChanServ  LIST pattern
      
      Lists all registered channels matching the given pattern.
      (Channels with the PRIVATE option set are not listed.)
      Note that a preceding '#' specifies a range, channel names
      are to be written without '#'.
    
    
  • OP
      Syntax: /msg ChanServ  OP [#channel [nick]]
      
      Ops a selected nick on a channel. If nick is not given,
      it will op you. If channel and nick are not given,
      it will op you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs or those with level 5 access 
      and above on the channel.
    
    
  • DEOP
      Syntax: /msg ChanServ  DEOP [#channel [nick]]
      
      Deops a selected nick on a channel. If nick is not given,
      it will deop you. If channel and nick are not given,
      it will deop you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs or those with level 5 access 
      and above on the channel.
      
    
  • VOICE
      Syntax: /msg ChanServ  VOICE [#channel [nick]]
      
      Voices a selected nick on a channel. If nick is not given,
      it will voice you. If channel and nick are not given,
      it will voice you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs or those with level 5 access 
      and above on the channel, or to VOPs or those with level 3 
      and above for self voicing.
    
    
  • DEVOICE
      Syntax: /msg ChanServ  DEVOICE [#channel [nick]]
      
      Devoices a selected nick on a channel. If nick is not given,
      it will devoice you. If channel and nick are not given,
      it will devoice you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs or those with level 5 access 
      and above on the channel, or to VOPs or those with level 3 
      and above for self devoicing.
      
    
  • HALFOP
      Syntax: /msg ChanServ  HALFOP [#channel [nick]]
      
      Halfops a selected nick on a channel. If nick is not given,
      it will halfop you. If channel and nick are not given,
      it will halfop you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs and those with level 5 access 
      and above on the channel, or to HOPs or those with level 4 
      and above for self halfopping.
    
    
  • DEHALFOP
      Syntax: /msg ChanServ  DEHALFOP [#channel [nick]]
      
      Dehalfops a selected nick on a channel. If nick is not given,
      it will dehalfop you. If channel and nick are not given,
      it will dehalfop you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs and those with level 5 access 
      and above on the channel, or to HOPs or those with level 4 
      and above for self dehalfopping.
      
    
  • PROTECT
      Syntax: /msg ChanServ  PROTECT [#channel [nick]]
      
      Protects a selected nick on a channel. If nick is not given,
      it will protect you. If channel and nick are not given,
      it will protect you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to the founder, or to SOPs or those with 
      level 10 and above on the channel for self protecting.
    
    
  • DEPROTECT
      Syntax: /msg ChanServ  DEPROTECT [#channel [nick]]
      
      Deprotects a selected nick on a channel. If nick is not given,
      it will deprotect you. If channel and nick are not given,
      it will deprotect you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to the founder, or to SOPs or those with 
      level 10 and above on the channel for self deprotecting.
    
    
  • OWNER
      Syntax: /msg ChanServ  OWNER [#channel]
      
      Gives you owner status on channel. If channel is not 
      given, it will give you owner status on all channels you're 
      on, provided you have the rights to.
      
      Limited to those with founder access on the channel.
    
    
  • DEOWNER
      Syntax: /msg ChanServ  DEOWNER [#channel]
      
      Removes your owner status on channel. If channel is 
      not given, it will remove your owner status on all channels 
      you're on, provided you have the rights to.
      
      Limited to those with founder access on the channel.
    
    
  • INVITE
      Syntax: /msg ChanServ  INVITE channel
      
      Tells ChanServ to invite you into the given channel.  
      
      By default, limited to AOPs or those with level 5 and above
      on the channel.
    
    
  • UNBAN
      Syntax: /msg ChanServ  UNBAN channel
      
      Tells ChanServ to remove all bans preventing you from
      entering the given channel.  
      
      By default, limited to AOPs or those with level 5 and above
      on the channel.
      
    
  • KICK
      Syntax: /msg ChanServ  KICK [#channel [nick [reason]]]
      
      Kicks a selected nick on a channel. If nick is not given,
      it will kick you. If channel and nick are not given,
      it will kick you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs or those with level 5 access 
      and above on the channel.
    
    
  • BAN
      Syntax: /msg ChanServ  BAN [#channel [nick [reason]]]
      
      Bans a selected nick on a channel. If nick is not given,
      it will ban you. If channel and nick are not given,
      it will ban you on all channels you're on, provided you
      have the rights to.
      
      By default, limited to AOPs or those with level 5 access 
      and above on the channel.
    
    
  • TOPIC
      Syntax: /msg ChanServ  TOPIC channel [topic]
      
      Causes ChanServ to set the channel topic to the one
      specified. If topic is not given, then an empty topic
      is set. This command is most useful in conjunction
      with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
      for more information.
      
      By default, limited to those with founder access on the
      channel. 
    
    
  • CLEAR
      Syntax: /msg ChanServ  CLEAR channel what
      
      Tells ChanServ to clear certain settings on a channel.  what
      can be any of the following:
      
           MODES    Resets all modes on the channel (i.e. clears
                        modes i,k,l,m,n,p,s,t).
           BANS     Clears all bans on the channel.
           EXCEPTS  Clears all excepts on the channel.
           INVITES  Clears all invites on the channel.
           OPS      Removes channel-operator status (mode +o) from
                        all channel operators.
           HOPS     Removes channel-halfoperator status (mode +h) from
                        all channel halfoperators, if supported.
           VOICES   Removes "voice" status (mode +v) from anyone
                        with that mode set.
           USERS    Removes (kicks) all users from the channel.
      
      By default, limited to those with founder access on the
      channel.
      
    
  • GETKEY
      Syntax: /msg ChanServ  GETKEY channel
      
      Returns the key of the given channel. This is a command
      mainly intended to be used by bots and/or scripts, so
      the output is in the following way:
      
      KEY <channel> <key>
      
      key is "NO KEY" if no key is set.
      
    
  • SENDPASS
      Syntax: /msg ChanServ  SENDPASS channel
      
      Send the password of the given channel to the e-mail address
      set in the founder's nickname record. This command is really 
      useful to deal with lost passwords.
      
      May be limited to IRC operators on certain networks.
      
      This command is unavailable when encryption is enabled.
    
    
  • SERVADMIN HELP
       
      Services admins can also drop any channel without needing
      to identify via password, and may view the access, AKICK,
      and level setting lists for any channel.
      
    
  • SERVADMIN LOGOUT
      Syntax: /msg ChanServ  LOGOUT channel [nickname]
      
      This command will log the selected nickname out meaning they 
      would have to reidentify themselves to regain their access.
      
      If you are the founder of the channel, you can log out anybody,
      else you can only log out yourself.
      
      If you are a Services admin, you can log out 
      anybody of any channel without having to be the founder
      of the channel. Also, you can omit the nickname parameter;
      this will log out all identified users from the channel.
    
    
  • SERVADMIN DROP
      Syntax: /msg ChanServ  DROP channel
      
      Unregisters the named channel.  Only Services admins
      can drop a channel for which they have not identified.
    
    
  • SERVADMIN SET
      
      Services admins can also set the option NOEXPIRE, with
      which channels can be prevented from expiring.
      Additionally, Services admins can set options for any
      channel without identifying by password for the channel.
    
    
  • SERVADMIN SET NOEXPIRE
      Syntax: /msg ChanServ  SET channel NOEXPIRE {ON | OFF}
      
      Sets whether the given channel will expire.  Setting this
      to ON prevents the channel from expiring.
    
    
  • SERVADMIN INFO
      
      Services admins can use the ALL parameter with any channel.
    
    
  • SERVADMIN LIST
      Syntax: /msg ChanServ  LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]
      
      Lists all registered channels matching the given pattern.
      Channels with the PRIVATE option set will only be displayed
      to Services admins. Channels with the NOEXPIRE option set 
      will have a ! appended to the channel name for Services admins.
      
      If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only 
      channels which, respectively, are FORBIDden, SUSPENDed or have 
      the NOEXPIRE flag set will be displayed.  If multiple options are 
      given, more types of channels will be displayed. These options are 
      limited to Services admins.
    
    
  • SERVADMIN GETPASS
      Syntax: /msg ChanServ  GETPASS channel
      
      Returns the password for the given channel.  Note that
      whenever this command is used, a message including the
      person who issued the command and the channel it was used
      on will be logged and sent out as a WALLOPS/GLOBOPS.
    
    
  • SERVADMIN FORBID
      Syntax: /msg ChanServ  FORBID channel [reason]
      
      Disallows anyone from registering or using the given
      channel.  May be cancelled by dropping the channel.
      
      Reason may be required on certain networks.
    
    
  • SERVADMIN SUSPEND
      Syntax: /msg ChanServ  SUSPEND channel [reason]
      
      Disallows anyone from registering or using the given
      channel.  May be cancelled by using the UNSUSPEND
      command to preserve all previous channel data/settings.
      
      Reason may be required on certain networks.
    
    
  • SERVADMIN UNSUSPEND
      Syntax: /msg ChanServ  UNSUSPEND channel
      
      Releases a suspended channel. All data and settings
      are preserved from before the suspension.
    
    
  • SERVADMIN STATUS
      Syntax: /msg ChanServ  STATUS channel nickname
      
      Returns the current access level of the given nick on the
      given channel.  The reply is of the form:
      
          STATUS channel nickname access-level
      
      If an error occurs, the reply will be in the form:
      
          STATUS ERROR error-message
    
    
    
  • | Fantasy Commands |

    | NickServ | ChanServ | MemoServ | HostServ | BotServ | OperServ |