nuphrax. account
You can Login or Connect and join.
(Use your nuPHRAX IRC nick/pass to login)
Affiliates
nuphrax .online.staff


Services on nuPHRAX

| NickServ | ChanServ | MemoServ | HostServ | BotServ | OperServ |

| Fantasy Commands |

NICKSERV

  • HELP
      NickServ allows you to "register" a nickname and
      prevent others from using it. The following
      commands allow for registration and maintenance of
      nicknames; to use them, type /msg NickServ command.
      For more information on a specific command, type
      /msg NickServ HELP command.
      
      
    
  • REGISTER
      Syntax: /msg NickServ  REGISTER password [email]
      
      Registers your nickname in the NickServ database.  Once
      your nick is registered, you can use the SET and ACCESS
      commands to configure your nick's settings as you like
      them.  Make sure you remember the password you use when
      registering - you'll need it to make changes to your nick
      later.  (Note that case matters!  ANOPE, Anope, and 
      anope are all different passwords!)
      
      Guidelines on choosing passwords:
      
      Passwords should not be easily guessable.  For example,
      using your real name as a password is a bad idea.  Using
      your nickname as a password is a much worse idea ;) and,
      in fact, NickServ will not allow it.  Also, short
      passwords are vulnerable to trial-and-error searches, so
      you should choose a password at least 5 characters long.
      Finally, the space character cannot be used in passwords.
      
      The parameter email is optional and will set the email
      for your nick immediately. However, it may be required
      on certain networks.
      Your privacy is respected; this e-mail won't be given to
      any third-party person.
      
      This command also creates a new group for your nickname,
      that will allow you to register other nicks later sharing
      the same configuration, the same set of memos and the
      same channel privileges. For more information on this
      feature, type /msg NickServ HELP GROUP.
      
    
  • GROUP
      Syntax: /msg NickServ  GROUP target password
      
      This command makes your nickname join the target nickname's 
      group. password is the password of the target nickname.
      
      Joining a group will allow you to share your configuration,
      memos, and channel privileges with all the nicknames in the
      group, and much more!
       
      A group exists as long as it is useful. This means that even
      if a nick of the group is dropped, you won't lose the
      shared things described above, as long as there is at
      least one nick remaining in the group.
      
      You can use this command even if you have not registered
      your nick yet. If your nick is already registered, you'll
      need to identify yourself before using this command. Type
      /msg NickServ HELP IDENTIFY for more information. This
      last may be not possible on your IRC network.
      
      It is recommended to use this command with a non-registered
      nick because it will be registered automatically when 
      using this command. You may use it with a registered nick (to 
      change your group) only if your network administrators allowed 
      it.
      
      You can only be in one group at a time. Group merging is
      not possible.
      
      Note: all the nicknames of a group have the same password.
    
    
  • IDENTIFY
      Syntax: /msg NickServ  IDENTIFY password
      
      Tells NickServ that you are really the owner of this
      nick.  Many commands require you to authenticate yourself
      with this command before you use them.  The password
      should be the same one you sent with the REGISTER
      command.
    
    
  • LOGOUT
      Syntax: /msg NickServ  LOGOUT
      
      This reverses the effect of the IDENTIFY command, i.e.
      make you not recognized as the real owner of the nick
      anymore. Note, however, that you won't be asked to reidentify
      yourself.
    
    
  • DROP
      Syntax: /msg NickServ  DROP [nickname]
      
      Drops your nickname from the NickServ database.  A nick
      that has been dropped is free for anyone to re-register.
      
      You may drop a nick within your group by passing it
      as the nick parameter.
      
      In order to use this command, you must first identify
      with your password (/msg NickServ HELP IDENTIFY for more
      information).
    
    
  • ACCESS
      Syntax: /msg NickServ  ACCESS ADD mask
              ACCESS DEL mask
              ACCESS LIST
      
      Modifies or displays the access list for your nick.  This
      is the list of addresses which will be automatically
      recognized by NickServ as allowed to use the nick.  If
      you want to use the nick from a different address, you
      need to send an IDENTIFY command to make NickServ
      recognize you.
      
      Examples:
      
          ACCESS ADD anyone@*.bepeg.com
              Allows access to user anyone from any machine in
              the bepeg.com domain.
      
          ACCESS DEL anyone@*.bepeg.com
              Reverses the previous command.
      
          ACCESS LIST
              Displays the current access list.
    
    
  • SET
      Syntax: /msg NickServ  SET option parameters
      
      Sets various nickname options.  option can be one of:
      
          DISPLAY    Set the display of your group in Services
          PASSWORD   Set your nickname password
          LANGUAGE   Set the language Services will use when
                         sending messages to you
          URL        Associate a URL with your nickname
          EMAIL      Associate an E-mail address with your nickname
          ICQ        Associate an ICQ number with your nickname
          GREET      Associate a greet message with your nickname
          KILL       Turn protection on or off
          SECURE     Turn nickname security on or off
          PRIVATE    Prevent your nickname from appearing in a
                         /msg NickServ LIST
          HIDE       Hide certain pieces of nickname information
          MSG        Change the communication method of Services
          AUTOOP     Should services op you automatically.    
      
      In order to use this command, you must first identify
      with your password (/msg NickServ HELP IDENTIFY for more
      information).
      
      Type /msg NickServ HELP SET option for more information
      on a specific option.
    
    
  • SET DISPLAY
      Syntax: /msg NickServ  SET DISPLAY new-display
      
      Changes the display used to refer to your nickname group in 
      Services. The new display MUST be a nick of your group.
    
    
  • SET PASSWORD
      Syntax: /msg NickServ  SET PASSWORD new-password
      
      Changes the password used to identify you as the nick's
      owner.
    
    
  • SET LANGUAGE
      Syntax: /msg NickServ  SET LANGUAGE number
      
      Changes the language Services uses when sending messages to
      you (for example, when responding to a command you send).
      number should be chosen from the following list of
      supported languages:
      
    
    
  • SET URL
      Syntax: /msg NickServ  SET URL url
      
      Associates the given URL with your nickname.  This URL
      will be displayed whenever someone requests information
      on your nick with the INFO command.
    
    
  • SET EMAIL
      Syntax: /msg NickServ  SET EMAIL address
      
      Associates the given E-mail address with your nickname.
      This address will be displayed whenever someone requests
      information on the nickname with the INFO command.
      
    
  • SET HIDE
      Syntax: /msg NickServ  SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
      
      Allows you to prevent certain pieces of information from
      being displayed when someone does a NickServ INFO on your
      nick.  You can hide your E-mail address (EMAIL), last seen
      user@host mask (USERMASK), your services access status
      (STATUS) and  last quit message (QUIT).
      The second parameter specifies whether the information should
      be displayed (OFF) or hidden (ON).
      
    
  • SET ICQ
      Syntax: /msg NickServ  SET ICQ number
      
      Associates the given ICQ number with your nickname.  This 
      number will be displayed whenever someone requests 
      information on your nick with the INFO command.
      
    
  • SET GREET
      Syntax: /msg NickServ  SET GREET message
      
      Makes the given message the greet of your nickname, that
      will be displayed when joining a channel that has GREET
      option enabled, provided that you have the necessary 
      access on it.
    
    
  • SET KILL
      Syntax: /msg NickServ  SET KILL {ON | QUICK | IMMED | OFF}
      
      Turns the automatic protection option for your nick
      on or off.  With protection on, if another user
      tries to take your nick, they will be given one minute to
      change to another nick, after which NickServ will forcibly change
      their nick.
      
      If you select QUICK, the user will be given only 20 seconds
      to change nicks instead of the usual 60.  If you select
      IMMED, user's nick will be changed immediately without being
      warned first or given a chance to change their nick; please
      do not use this option unless necessary.  Also, your
      network's administrators may have disabled this option.
    
    
  • SET SECURE
      Syntax: /msg NickServ  SET SECURE {ON | OFF}
      
      Turns NickServ's security features on or off for your
      nick.  With SECURE set, you must enter your password
      before you will be recognized as the owner of the nick,
      regardless of whether your address is on the access
      list.  However, if you are on the access list, NickServ
      will not auto-kill you regardless of the setting of the
      KILL option.
    
    
  • SET PRIVATE
      Syntax: /msg NickServ  SET PRIVATE {ON | OFF}
      
      Turns NickServ's privacy option on or off for your nick.
      With PRIVATE set, your nickname will not appear in
      nickname lists generated with NickServ's LIST command.
      (However, anyone who knows your nickname can still get
      information on it using the INFO command.)
    
    
  • UPDATE
      Syntax: /msg NickServ  UPDATE
    
      Updates your current status, i.e. it checks for new memos,
      sets needed chanmodes (ModeonID) and updates your vhost and
      your userflags (lastseentime, etc).
      
    
  • SET HIDE
      Syntax: /msg NickServ  SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
      
      Allows you to prevent certain pieces of information from
      being displayed when someone does a NickServ INFO on your
      nick.  You can hide your E-mail address (EMAIL), last seen
      user@host mask (USERMASK), your services access status
      (STATUS) and  last quit message (QUIT).
      The second parameter specifies whether the information should
      be displayed (OFF) or hidden (ON).
      
    
  • SET MSG
      Syntax: /msg NickServ  SET MSG {ON | OFF}
      
      Allows you to choose the way Services are communicating with 
      you. With MSG set, Services will use messages, else they'll 
      use notices.
    
    
  • RECOVER
      Syntax: /msg NickServ  RECOVER nickname [password]
      
      Allows you to recover your nickname if someone else has
      taken it; this does the same thing that NickServ does
      automatically if someone tries to use a kill-protected
      nick.
      
      When you give this command, NickServ will bring a fake
      user online with the same nickname as the user you're
      trying to recover your nick from.  This causes the IRC
      servers to disconnect the other user.  This fake user will
      remain online for NickServ to ensure that the other
      user does not immediately reconnect; after that time, you
      can reclaim your nick.  Alternatively, use the RELEASE
      command (/msg NickServ HELP RELEASE) to get the nick
      back sooner.
      
      In order to use the RECOVER command for a nick, your
      current address as shown in /WHOIS must be on that nick's
      access list, you must be identified and in the group of
      that nick, or you must supply the correct password for
      the nickname.
    
    
  • RELEASE
      Syntax: /msg NickServ  RELEASE nickname [password]
      
      Instructs NickServ to remove any hold on your nickname
      caused by automatic kill protection or use of the RECOVER
      command.  This holds lasts for NickServ;
      this command gets rid of them sooner.
      
      In order to use the RELEASE command for a nick, your
      current address as shown in /WHOIS must be on that nick's
      access list, you must be identified and in the group of
      that nick, or you must supply the correct password for
      the nickname.
    
    
  • GHOST
      Syntax: /msg NickServ  GHOST nickname [password]
      
      Terminates a "ghost" IRC session using your nick.  A
      "ghost" session is one which is not actually connected,
      but which the IRC server believes is still online for one
      reason or another.  Typically, this happens if your
      computer crashes or your Internet or modem connection
      goes down while you're on IRC.
      
      In order to use the GHOST command for a nick, your
      current address as shown in /WHOIS must be on that nick's
      access list, you must be identified and in the group of
      that nick, or you must supply the correct password for
      the nickname.
    
    
  • INFO
      Syntax: /msg NickServ  INFO nickname [ALL]
      
      Displays information about the given nickname, such as
      the nick's owner, last seen address and time, and nick
      options. If you are identified for the nick you're 
      getting information for and ALL is specified, you will
      be shown all the information; regardless of whether 
      it's hidden or not.
    
    
  • LIST
      Syntax: /msg NickServ  LIST pattern
      
      Lists all registered nicknames which match the given
      pattern, in nick!user@host format.  Nicks with the
      PRIVATE option set will not be displayed.
      Note that a pattern preceding with a '#' specifies a range.
      
      Examples:
      
          LIST *!joeuser@foo.com
              Lists all nicks owned by joeuser@foo.com.
      
          LIST *Bot*!*@*
              Lists all registered nicks with Bot in their
              names (case insensitive).
      
          LIST *!*@*.bar.org
              Lists all nicks owned by users in the bar.org
              domain.
      
          LIST #50-100
              Lists nicks numbers 50-100
    
    
  • ALIST
      Syntax: /msg NickServ  ALIST [level]
      
      Lists all channels you have access on. Optionally, you can specify
      a level in XOP or ACCESS format. The resulting list will only
      include channels where you have the given level of access.
    
      Examples:
          ALIST Founder
              Lists all channels where you have Founder
              access.
    
          ALIST AOP
              Lists all channels where you have AOP
              access or greater.
    
          ALIST 10
              Lists all channels where you have level 10
              access or greater.
    
      Channels that have the NOEXPIRE option set will be
      prefixed by an exclamation mark.
    
    
  • GLIST
      Syntax: /msg NickServ  GLIST
      
      Lists all nicks in your group.
    
    
  • STATUS
      Syntax: /msg NickServ  STATUS nickname...
      
      Returns whether the user using the given nickname is
      recognized as the owner of the nickname.  The response has
      this format:
      
          nickname status-code
      
      where nickname is the nickname sent with the command, and
      status-code is one of the following:
      
          0 - no such user online or nickname not registered
          1 - user not recognized as nickname's owner
          2 - user recognized as owner via access list only
          3 - user recognized as owner via password identification
      
      Up to sixteen nicknames may be sent with each command; the
      rest will be ignored. If no nickname is given, your status
      will be returned.
    
    
  • SENDPASS
      Syntax: /msg NickServ  SENDPASS nickname
      
      Send the password of the given nickname to the e-mail address
      set in the nickname record. This command is really useful
      to deal with lost passwords.
      
      May be limited to IRC operators on certain networks.
      
      This command is unavailable when encryption is enabled.
    
    
  • EXPIRES
      
      Nicknames that are not used anymore are subject to 
      the automatic expiration, i.e. they will be deleted
      after 120 days if not used.
    
    
  • SERVADMIN HELP
       
      Services admins can also drop any nickname without needing
      to identify for the nick, and may view the access list for
      any nickname (/msg NickServ ACCESS LIST nick).
    
    
  • SERVADMIN LOGOUT
      Syntax: /msg NickServ  LOGOUT [nickname [REVALIDATE]]
      
      Without a parameter, reverses the effect of the IDENTIFY 
      command, i.e. make you not recognized as the real owner of the nick
      anymore. Note, however, that you won't be asked to reidentify
      yourself.
      
      With a parameter, does the same for the given nick. If you 
      specify REVALIDATE as well, Services will ask the given nick
      to re-identify. This use limited to Services admins.
    
    
  • SERVADMIN DROP
      Syntax: /msg NickServ  DROP [nickname]
      
      Without a parameter, drops your nickname from the
      NickServ database.
      
      With a parameter, drops the named nick from the database.
      You may drop any nick within your group without any 
      special privileges. Dropping any nick is limited to 
      Services admins.
    
    
  • SERVADMIN LIST
      Syntax: /msg NickServ  LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE] [UNCONFIRMED]
      
      Lists all registered nicknames which match the given
      pattern, in nick!user@host format.  Nicks with the PRIVATE
      option set will only be displayed to Services admins.  Nicks
      with the NOEXPIRE option set will have a ! appended to
      the nickname for Services admins.
      
      If the FORBIDDEN, SUSPENDED, NOEXPIRE or UNCONFIRMED options are given, only
      nicks which, respectively, are FORBIDDEN, SUSPENDED, UNCONFIRMED or have the
      NOEXPIRE flag set will be displayed. If multiple options are
      given, all nicks matching at least one option will be displayed.
      These options are limited to Services admins.  
    
      Examples:
      
          LIST *!joeuser@foo.com
              Lists all registered nicks owned by joeuser@foo.com.
      
          LIST *Bot*!*@*
              Lists all registered nicks with Bot in their
              names (case insensitive).
      
          LIST * NOEXPIRE
              Lists all registered nicks which have been set to
              not expire.
    
    
  • SERVADMIN ALIST
      Syntax: /msg NickServ  ALIST [nickname] [level]
      
      With no parameters, lists channels you have access on. With
      one parameter, lists channels that nickname has access 
      on. With two parameters lists channels that nickname has 
      level access or greater on.
    
      This use limited to Services admins.
    
    
  • SERVADMIN GLIST
      Syntax: /msg NickServ  GLIST [nickname]
      
      Without a parameter, lists all nicknames that are in
      your group.
      
      With a parameter, lists all nicknames that are in the
      group of the given nick.
      This use limited to Services admins.
    
    
  • SERVADMIN GETPASS
      Syntax: /msg NickServ  GETPASS nickname
      
      Returns the password for the given nickname.  Note that
      whenever this command is used, a message including the
      person who issued the command and the nickname it was used
      on will be logged and sent out as a WALLOPS/GLOBOPS.
      
      This command is unavailable when encryption is enabled.
    
    
  • SERVADMIN FORBID
      Syntax: /msg NickServ  FORBID nickname [reason]
      
      Disallows a nickname from being registered or used by
      anyone.  May be cancelled by dropping the nick.
      
      On certain networks, reason is required.
    
    
  • SERVADMIN INFO
      
      Services admins may use the ALL parameter with any nick.
    
    
  • | Fantasy Commands |

    | NickServ | ChanServ | MemoServ | HostServ | BotServ | OperServ |