nuphrax. account
You can Login or Connect and join.
(Use your nuPHRAX IRC nick/pass to login)
Affiliates
nuphrax .online.staff


Services on nuPHRAX

| NickServ | ChanServ | MemoServ | HostServ | BotServ | OperServ |

| Fantasy Commands |

OPERSERV

  • HELP
      OperServ commands:
    
    
  • GLOBAL
      Syntax: /msg OperServ  GLOBAL message
      
      Allows Administrators to send messages to all users on the 
      network. The message will be sent from the nick OperServ.
    
    
  • STATS
      Syntax: /msg OperServ  STATS [AKILL | ALL | RESET | MEMORY | UPLINK]
      
      Without any option, shows the current number of users and
      IRCops online (excluding Services), the highest number of
      users online since Services was started, and the length of
      time Services has been running.
      
      With the AKILL option, displays the current size of the
      AKILL list and the current default expiry time.
      
      The RESET option currently resets the maximum user count
      to the number of users currently present on the network.
      
      The MEMORY option displays information on the memory
      usage of Services. Using this option can freeze Services for
      a short period of time on large networks; don't overuse it!
      
      The UPLINK option displays information about the current
      server Anope uses as an uplink to the network.
      
      The ALL displays the user and uptime statistics, and
      everything you'd see with MEMORY and UPLINK options.
      
      UPTIME may be used as a synonym for STATS.
    
    
  • OPER
      Syntax: /msg OperServ  OPER ADD nick
              OPER DEL {nick | entry-num | list}
              OPER LIST [mask | list]
              OPER CLEAR
      
      Allows the Services Root Admins to add or remove nicknames
      to or from the Services operator list.  A user whose nickname
      is on the Services operator list and who has identified to
      OperServ will be able to access Services operator commands.
      
      The OPER ADD command adds the given nickname to the
      Services operator list.
      
      The OPER DEL command removes the given nick from the
      Services operator list.  If a list of entry numbers is given, 
      those entries are deleted.  (See the example for LIST below.)
      
      The OPER LIST command displays the Services operator list.  
      If a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         OPER LIST 2-5,7-9
            Lists Services operator entries numbered 2 through 
            5 and 7 through 9.
            
      The OPER CLEAR command clears all entries of the
      Services operator list.
      
      Any IRC operator may use the OPER LIST form of the command.
    
    
  • ADMIN
      Syntax: /msg OperServ  ADMIN ADD nick
              ADMIN DEL {nick | entry-num | list}
              ADMIN LIST [mask | list]
              ADMIN CLEAR
      
      Allows the Services root to add or remove nicknames
      to or from the Services admin list.  A user whose nickname
      is on the Services admin list and who has identified to
      OperServ will be able to access Services admin commands.
      
      The ADMIN ADD command adds the given nickname to the
      Services admin list.
      
      The ADMIN DEL command removes the given nick from the
      Services admin list.  If a list of entry numbers is given,
      those entries are deleted.  (See the example for LIST below.)
      
      The ADMIN LIST command displays the Services admin list.  
      If a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         ADMIN LIST 2-5,7-9
            Lists Services admin entries numbered 2 through 
            5 and 7 through 9.
            
      The ADMIN CLEAR command clears all entries of the
      Services admin list.
      
      Any IRC operator may use the ADMIN LIST form of the command.
      All other use limited to Services root.
    
    
  • IGNORE
      Syntax: /msg OperServ  IGNORE {ADD|DEL|LIST|CLEAR} [time] [nick | mask]
      
      Allows Services Admins to make Services ignore a nick or mask
      for a certain time or until the next restart. The default
      time format is seconds. You can specify it by using units.
      Valid units are: s for seconds, m for minutes, 
      h for hours and d for days. 
      Combinations of these units are not permitted.
      To make Services permanently ignore the	user, type 0 as time.
      When adding a mask, it should be in the format user@host
      or nick!user@host, everything else will be considered a nick.
      Wildcards are permitted.
      
      Ignores will not be enforced on IRC Operators.
    
    
  • MODE
      Syntax: /msg OperServ  MODE channel modes
      
      Allows Services operators to set channel modes for any
      channel.  Parameters are the same as for the standard /MODE
      command.
    
    
  • UMODE
      Syntax: /msg OperServ  UMODE user modes
      
      Allows Super Admins to set user modes for any user.
      Parameters are the same as for the standard /MODE
      command.
    
    
  • OLINE
      Syntax: /msg OperServ  OLINE user flags
      
      Allows Super Admins to give Operflags to any user.
      Flags have to be prefixed with a "+" or a "-". To
      remove all flags simply type a "-" instead of any flags.
    
    
  • CLEARMODES
      Syntax: /msg OperServ  CLEARMODES channel [ALL]
      
      Clears all binary modes (i,k,l,m,n,p,s,t) and bans from a
      channel.  If ALL is given, also clears all ops and
      voices (+o and +v modes) from the channel.
    
    
  • KICK
      Syntax: /msg OperServ  KICK channel user reason
      
      Allows staff to kick a user from any channel.
      Parameters are the same as for the standard /KICK
      command.  The kick message will have the nickname of the
      IRCop sending the KICK command prepended; for example:
      
      *** SpamMan has been kicked off channel #my_channel by OperServ (Alcan (Flood))
    
    
  • AKILL
      Syntax: /msg OperServ  AKILL ADD [+expiry] mask reason
              AKILL DEL {mask | entry-num | list}
              AKILL LIST [mask | list]
              AKILL VIEW [mask | list]
              AKILL CLEAR
      
      Allows Services operators to manipulate the AKILL list.  If
      a user matching an AKILL mask attempts to connect, Services
      will issue a KILL for that user and, on supported server
      types, will instruct all servers to add a ban (K-line) for
      the mask which the user matched.
      
      AKILL ADD adds the given user@host/ip mask to the AKILL
      list for the given reason (which must be given).
      expiry is specified as an integer followed by one of d 
      (days), h (hours), or m (minutes).  Combinations (such as 
      1h30m) are not permitted.  If a unit specifier is not 
      included, the default is days (so +30 by itself means 30 
      days).  To add an AKILL which does not expire, use +0.  If the
      usermask to be added starts with a +, an expiry time must
      be given, even if it is the same as the default.  The
      current AKILL default expiry time can be found with the
      STATS AKILL command.
      
      The AKILL DEL command removes the given mask from the
      AKILL list if it is present.  If a list of entry numbers is 
      given, those entries are deleted.  (See the example for LIST 
      below.)
      
      The AKILL LIST command displays the AKILL list.  
      If a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         AKILL LIST 2-5,7-9
            Lists AKILL entries numbered 2 through 5 and 7 
            through 9.
            
      AKILL VIEW is a more verbose version of AKILL LIST, and 
      will show who added an AKILL, the date it was added, and when 
      it expires, as well as the user@host/ip mask and reason.
      
      AKILL CLEAR clears all entries of the AKILL list.
      
    
  • SGLINE
      Syntax: /msg OperServ  SGLINE ADD [+expiry] mask:reason
          SGLINE DEL {mask | entry-num | list}
              SGLINE LIST [mask | list]
              SGLINE VIEW [mask | list]
              SGLINE CLEAR
      
      Allows Services operators to manipulate the SGLINE list.  If
      a user with a realname matching an SGLINE mask attempts to 
      connect, Services will not allow it to pursue his IRC
      session.
      
      SGLINE ADD adds the given realname mask to the SGLINE
      list for the given reason (which must be given).
      expiry is specified as an integer followed by one of d 
      (days), h (hours), or m (minutes).  Combinations (such as 
      1h30m) are not permitted.  If a unit specifier is not 
      included, the default is days (so +30 by itself means 30 
      days).  To add an SGLINE which does not expire, use +0.  If the
      realname mask to be added starts with a +, an expiry time must
      be given, even if it is the same as the default.  The
      current SGLINE default expiry time can be found with the
      STATS AKILL command.
      Note: because the realname mask may contain spaces, the
      separator between it and the reason is a colon.
      
      The SGLINE DEL command removes the given mask from the
      SGLINE list if it is present.  If a list of entry numbers is 
      given, those entries are deleted.  (See the example for LIST 
      below.)
      
      The SGLINE LIST command displays the SGLINE list.  
      If a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         SGLINE LIST 2-5,7-9
            Lists SGLINE entries numbered 2 through 5 and 7 
            through 9.
            
      SGLINE VIEW is a more verbose version of SGLINE LIST, and 
      will show who added an SGLINE, the date it was added, and when 
      it expires, as well as the realname mask and reason.
      
      SGLINE CLEAR clears all entries of the SGLINE list.
    
    
  • SQLINE
      Syntax: /msg OperServ  SQLINE ADD [+expiry] mask reason
              SQLINE DEL {mask | entry-num | list}
              SQLINE LIST [mask | list]
              SQLINE VIEW [mask | list]
              SQLINE CLEAR
      
      Allows Services operators to manipulate the SQLINE list.  If
      a user with a nick matching an SQLINE mask attempts to 
      connect, Services will not allow it to pursue his IRC
      session.
    
      If the first character of the mask is #, services will 
      prevent the use of matching channels (on IRCds that 
      support it).
      
      SQLINE ADD adds the given mask to the SQLINE
      list for the given reason (which must be given).
      expiry is specified as an integer followed by one of d 
      (days), h (hours), or m (minutes).  Combinations (such as 
      1h30m) are not permitted.  If a unit specifier is not 
      included, the default is days (so +30 by itself means 30 
      days).  To add an SQLINE which does not expire, use +0.  
      If the mask to be added starts with a +, an expiry time 
      must be given, even if it is the same as the default. The
      current SQLINE default expiry time can be found with the
      STATS AKILL command.
      
      The SQLINE DEL command removes the given mask from the
      SQLINE list if it is present.  If a list of entry numbers is 
      given, those entries are deleted.  (See the example for LIST 
      below.)
      
      The SQLINE LIST command displays the SQLINE list.  
      If a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         SQLINE LIST 2-5,7-9
            Lists SQLINE entries numbered 2 through 5 and 7 
            through 9.
            
      SQLINE VIEW is a more verbose version of SQLINE LIST, and 
      will show who added an SQLINE, the date it was added, and when 
      it expires, as well as the mask and reason.
      
      SQLINE CLEAR clears all entries of the SQLINE list.
    
    
  • SZLINE
      Syntax: /msg OperServ  SZLINE ADD [+expiry] mask reason
              SZLINE DEL {mask | entry-num | list}
              SZLINE LIST [mask | list]
              SZLINE VIEW [mask | list]
              SZLINE CLEAR
      
      Allows Services operators to manipulate the SZLINE list.  If
      a user with an IP matching an SZLINE mask attempts to 
      connect, Services will not allow it to pursue his IRC
      session (and this, whether the IP has a PTR RR or not).
      
      SZLINE ADD adds the given IP mask to the SZLINE
      list for the given reason (which must be given).
      expiry is specified as an integer followed by one of d 
      (days), h (hours), or m (minutes).  Combinations (such as 
      1h30m) are not permitted.  If a unit specifier is not 
      included, the default is days (so +30 by itself means 30 
      days).  To add an SZLINE which does not expire, use +0.  If the
      realname mask to be added starts with a +, an expiry time must
      be given, even if it is the same as the default.  The
      current SZLINE default expiry time can be found with the
      STATS AKILL command.
      
      The SZLINE DEL command removes the given mask from the
      SZLINE list if it is present.  If a list of entry numbers is 
      given, those entries are deleted.  (See the example for LIST 
      below.)
      
      The SZLINE LIST command displays the SZLINE list.  
      If a wildcard mask is given, only those entries matching the
      mask are displayed.  If a list of entry numbers is given,
      only those entries are shown; for example:
    
         SZLINE LIST 2-5,7-9
            Lists SZLINE entries numbered 2 through 5 and 7 
            through 9.
            
      SZLINE VIEW is a more verbose version of SZLINE LIST, and 
      will show who added an SZLINE, the date it was added, and when
      it expires, as well as the IP mask and reason.
      
      SZLINE CLEAR clears all entries of the SZLINE list.
    
    
  • SET
      Syntax: /msg OperServ  SET option setting
    
      Sets various global Services options.  Option names
      currently defined are:
          READONLY   Set read-only or read-write mode
          LOGCHAN    Report log messages to a channel
          DEBUG      Activate or deactivate debug mode
          NOEXPIRE   Activate or deactivate no expire mode
          SUPERADMIN Activate or deactivate super-admin mode
          SQL        Activate or deactivate sql mode
          IGNORE     Activate or deactivate ignore mode
          LIST       List the options
    
    
  • SET READONLY
      Syntax: /msg OperServ  SET READONLY {ON | OFF}
      
      Sets read-only mode on or off.  In read-only mode, normal
      users will not be allowed to modify any Services data,
      including channel and nickname access lists, etc.  IRCops
      with sufficient Services privileges will be able to modify
      Services' AKILL list and drop or forbid nicknames and
      channels, but any such changes will not be saved unless
      read-only mode is deactivated before Services is terminated
      or restarted.
      
      This option is equivalent to the command-line option
      -readonly.
    
    
  • SET LOGCHAN
      Syntax: /msg OperServ  SET LOGCHAN {ON | OFF}
    
      With this setting on, Services will send its logs to a specified
      channel as well as the log file. LogChannel must also be defined
      in the Services configuration file for this setting to be of any
      use.
      
      This option is equivalent to the command-line option -logchan.
      
      Note: This can have strong security implications if your log
      channel is not properly secured.
    
    
  • SET DEBUG
      Syntax: /msg OperServ  SET DEBUG {ON | OFF | num}
      
      Sets debug mode on or off.  In debug mode, all data sent to
      and from Services as well as a number of other debugging
      messages are written to the log file.  If num is
      given, debug mode is activated, with the debugging level set
      to num.
    
      This option is equivalent to the command-line option
      -debug.
    
    
  • SET LIST
      Syntax: /msg OperServ  SET LIST
    
      Display the various OperServ settings
    
    
  • SET NOEXPIRE
      Syntax: /msg OperServ  SET NOEXPIRE {ON | OFF}
    
      Sets no expire mode on or off.  In no expire mode, nicks,
      channels, akills and exceptions won't expire until the
      option is unset.
    
      This option is equivalent to the command-line option
      -noexpire.
    
    
  • SET SQL
      Syntax: /msg OperServ  SET SQL {ON | OFF}
    
      Setting this will toggle Anope's usage of SQL, this should
      be used to disable and enable SQL should your SQL server go down
      while services are running.
    
    
  • SET SUPERADMIN
      Syntax: /msg OperServ  SET SUPERADMIN {ON | OFF}
    
      Setting this will grant you extra privileges such as the
      ability to be "founder" on all channel's etc...
    
      This option is not persistent, and should only be used when
      needed, and set back to OFF when no longer needed.
    
    
  • NOOP
      Syntax: /msg OperServ  NOOP SET server
              NOOP REVOKE server
    
      NOOP SET remove all O:lines of the given
      server and kill all IRCops currently on it to
      prevent them from rehashing the server (because this
      would just cancel the effect).
    
      NOOP REVOKE makes all removed O:lines available again
      on the given server.
    
      Note: The server is not checked at all by the
      Services.
    
    
  • JUPE
      Syntax: /msg OperServ  JUPE server [reason]
      
      Tells Services to jupiter a server -- that is, to create
      a fake "server" connected to Services which prevents
      the real server of that name from connecting.  The jupe
      may be removed using a standard SQUIT.  If a reason is
      given, it is placed in the server information field;
      otherwise, the server information field will contain the
      text "Juped by <nick>", showing the nickname of the
      person who jupitered the server.
    
    
  • RAW
      Syntax: /msg OperServ  RAW text
      
      Sends a string of text directly to the server to which
      Services is connected.  This command has a very limited
      range of uses, and can wreak havoc on a network if used
      improperly.  DO NOT USE THIS COMMAND unless you are
      absolutely certain you know what you are doing!
    
    
  • UPDATE
      Syntax: /msg OperServ  UPDATE
      
      Causes Services to update all database files as soon as you
      send the command.
      
    
  • RELOAD
      Syntax: /msg OperServ  RELOAD
    
      Causes Services to reload the configuration file. Note that
      some directives still need the restart of the Services to
      take effect (such as Services' nicknames, activation of the 
      session limitation, etc.)
    
    
  • QUIT
      Syntax: /msg OperServ  QUIT
      
      Causes Services to do an immediate shutdown; databases are
      not saved.  This command should not be used unless
      damage to the in-memory copies of the databases is feared
      and they should not be saved.  For normal shutdowns, use the
      SHUTDOWN command.
    
    
  • SHUTDOWN
      Syntax: /msg OperServ  SHUTDOWN
      
      Causes Services to save all databases and then shut down.
    
    
  • RESTART
      Syntax: /msg OperServ  RESTART
      
      Causes Services to save all databases and then restart
      (i.e. exit and immediately re-run the executable).
    
    
  • CHANLIST
      Syntax: /msg OperServ  CHANLIST [{pattern | nick} [SECRET]]
      
      Lists all channels currently in use on the IRC network, whether they
      are registered or not.
    
      If pattern is given, lists only channels that match it. If a nickname
      is given, lists only the channels the user using it is on. If SECRET is
      specified, lists only channels matching pattern that have the +s or
      +p mode.
    
    
  • USERLIST
      Syntax: /msg OperServ  USERLIST [{pattern | channel} [INVISIBLE]]
      
      Lists all users currently online on the IRC network, whether their
      nick is registered or not.
      
      If pattern is given, lists only users that match it (it must be in
      the format nick!user@host). If channel is given, lists only users
      that are on the given channel. If INVISIBLE is specified, only users
      with the +i flag will be listed.
    
    
  • EXCEPTION
      Syntax: /msg OperServ  EXCEPTION ADD [+expiry] mask limit reason
              EXCEPTION DEL {mask | list}
              EXCEPTION MOVE num position
              EXCEPTION LIST [mask | list]
              EXCEPTION VIEW [mask | list]
      
      Allows Services admins to manipulate the list of hosts that
      have specific session limits - allowing certain machines, 
      such as shell servers, to carry more than the default number
      of clients at a time. Once a host reaches it's session limit,
      all clients attempting to connect from that host will be
      killed. Before the user is killed, they are notified, via a
      /NOTICE from OperServ, of a source of help regarding session
      limiting. The content of this notice is a config setting.
      
      EXCEPTION ADD adds the given host mask to the exception list.
      Note that nick!user@host and user@host masks are invalid!
      Only real host masks, such as box.host.dom and *.host.dom,
      are allowed because sessions limiting does not take nick or
      user names into account. limit must be a number greater than
      or equal to zero. This determines how many sessions this host
      may carry at a time. A value of zero means the host has an
      unlimited session limit. See the AKILL help for details about
      the format of the optional expiry parameter.
      EXCEPTION DEL removes the given mask from the exception list.
      EXCEPTION MOVE moves exception num to position. The
      exceptions inbetween will be shifted up or down to fill the gap.
      EXCEPTION LIST and EXCEPTION VIEW show all current
      exceptions; if the optional mask is given, the list is limited
      to those exceptions matching the mask. The difference is that
      EXCEPTION VIEW is more verbose, displaying the name of the
      person who added the exception, it's session limit, reason, 
      host mask and the expiry date and time.
      
      Note that a connecting client will "use" the first exception
      their host matches. Large exception lists and widely matching
      exception masks are likely to degrade services' performance.
    
    
  • SESSION
      Syntax: /msg OperServ  SESSION LIST threshold
              SESSION VIEW host
      
      Allows Services admins to view the session list.
    
      SESSION LIST lists hosts with at least threshold sessions.
      The threshold must be a number greater than 1. This is to 
      prevent accidental listing of the large number of single 
      session hosts.
      SESSION VIEW displays detailed information about a specific
      host - including the current session count and session limit.
      The host value may not include wildcards.
    
      See the EXCEPTION help for more information about session
      limiting and how to set session limits specific to certain
      hosts and groups thereof.
    
    
  • CHANKILL
      Syntax: /msg OperServ  CHANKILL [+expiry] channel reason
    
      Puts an AKILL for every nick on the specified channel. It
      uses the entire and complete real ident@host for every nick,
      then enforces the AKILL. 
    
    
    
  • DEFCON
      Syntax: /msg OperServ  DEFCON [1|2|3|4|5]
    
      The defcon system can be used to implement a pre-defined
      set of restrictions to services useful during an attempted
      attack on the network.
    
    
  • DEFCON AKILL NEW CLIENTS
      * AKILL any new clients connecting
    
  • DEFCON FORCE CHAN MODES
      * Force Chan Modes (OperServ) to be set on all channels
    
  • DEFCON NO MLOCK CHANGE
      * No MLOCK changes
    
  • DEFCON NO NEW CHANNELS
      * No new channel registrations
    
  • DEFCON NO NEW CLIENTS
      * Kill any NEW clients connecting
    
  • DEFCON NO NEW MEMOS
      * No new memos sent
    
  • DEFCON NO NEW NICKS
      * No new nick registrations
    
  • DEFCON ONLY
      * Ignore any non-opers with message
    
  • DEFCON REDUCE SESSION
      * Use the reduced session limit of 10
    
  • DEFCON SILENT ONLY
      * Silently ignore non-opers
    
  • LOGGED
      Notice: All commands sent to OperServ are logged!
    
    
  • MODINFO
      Syntax: /msg OperServ  MODINFO FileName
      
      This command lists information about the specified loaded module
    
    
  • MODLIST
      Syntax: /msg OperServ  MODLIST [Core|3rd|protocol|encryption|supported|qatested]
      
      Lists all currently loaded modules.
    
    
    
  • MODLOAD
      Syntax: /msg OperServ  MODLOAD FileName
      
      This command loads the module named FileName from the modules
      directory.
    
    
  • MODUNLOAD
      Syntax: /msg OperServ  MODUNLOAD FileName
      
      This command unloads the module named FileName from the modules
      directory.
    
    
  • SVSNICK
      Syntax: /msg OperServ  SVSNICK nick newnick
      
      Forcefully changes a user's nickname from nick to newnick.
      Limited to Super Admins.
    
    
  • | Fantasy Commands |

    | NickServ | ChanServ | MemoServ | HostServ | BotServ | OperServ |